Inc. VAT

Need help? Call us on 03332 406 406


0 items


How does Click & Reserve work?

Find your nearest store and check stock:

Showing your nearest stores and current stock for Order Code:

    • Stock is only reserved when you have completed the reservation process and received email or text confirmation. This guarantees that your products are available and ready for you to pick up.

63mm Dust Extraction Kit


Key Features

  • Especially for the smaller workshop
  • Ducting package complete with elbows, blast gates and adaptors
  • 8 three foot lengths of tube (63mm diameter)
  • 4 x tee joints
  • 3 x 45° joiners
  • 2 x 90° elbows
  • 16 x pipe joiners
  • 5 x plastic blast gates
  • 10 x wall clips
  • 100mm to 63mm adaptor
  • Additional parts available separately


A ducting package complete with elbows, blast gates and adaptors for connecting up your machines to a workshop extractor. Simply fix a horizontal pipe to the wall or ceiling with the clips supplied and then take branch pipes to exactly where the extraction points are needed in the workshop, using the T junctions and 63mm flexible hose. Attach a vacuum extractor and away you go! The kit consists of 8 x three feet lengths of tube (63mm diameter), 4 x tee joints, 3 x 45° joiners, 2 x 90° elbows, 16 x pipe joiners, 5 x plastic blast gates, 10 x wall clips and a 100mm to 63mm adaptor. A suitable hose for use with the dust extraction kit is the PVC Superflex hose which is available in 2.5m lengths (505003). If the kit does not have enough components then additional parts are available separately.

Additional Information
Model N/A

Buy Now (select options and quantity)

Order Code: 410063

£104.95 Inc. VAT

- +
  • In stock and ready for dispatch.
  • Order by 4pm for same day dispatch*.
  • Click & Reserve available - Check Stock
  • Free Standard UK delivery*.

    Restrictions may apply. Find out morelink pointer

  • International Delivery available*.

    Restrictions may apply. Find out morelink pointer

  • Easy returns process

    If you're not 100% happy. Find out morelink pointer

Customer Reviews


By: Andrew

Posted: 12 March 2014

Arrived promptly and well packed. it is easy to cut to size and fit together. the best way to fit is with a small screw so they dont come apart over time, but i found that there is no need to seal joins as they are a good fit. the kit has a large variety of parts so there is only need to order minimal parts separately. however im a little disappointed that axminster do not sell any Y joiners as you loose less air flow through them rather than Ts. now the system is up i would not be without it. Well done Axminster!


By: Nigel Wyant

Posted: 10 January 2012

Re-arranging my system with one of these kits has vastly improved the dust collection in our workshop. I have a 100mm collector which runs to a table saw first then into this system with a band saw, belt sander , disc sander, bobbin sander and a scroll saw. You can see the dusyt going up the pipe !!! The only negative is that the quantities of bits could be better ...I didnt use any joiners and could have done with more brackets. But still well worth the money


By: Brian Holroyd

Posted: 2 September 2011

The kit represents good value, but like the other two reviewers, I would say it needs more right angle bends and fewer straight joiners. I used silicone sealant on the inside of the joints. These have a marked taper on them (the insides of the joiners, bends and t-pieces) so that I needed to drill through each joint and pop in a small self-tapping screw, otherwise they just slid apart again.
I used rainwater downpipe sockets upside down to connect flexible hose to the blast gates.


By: Mr Steve Jarman

Posted: 9 September 2009

Excellent value based upon the individual prices. There are some minor points however, there are not enough 90 degree elbows! The gates SHOULD be mounted vertically or they fill with dust and don’t work at all… again, use duct tape or some sealant to seal the joints. Best cut the pipes with a mitre saw and get them exact. I’m using it with a 12” Disc Sander and a Bandsaw, and all seems well. This is absolutely ideal for a small workshop, where 100mm pipe would be an overkill.


By: Mr fred morton

Posted: 11 July 2008

This kit makes it easy to duct your vacuum machine to where you want it. With the use of a flexi hose, the vacuum is available for most small fixed and hand held tools around the workshop. There are plenty of fittings to make a substantial installation. I've had mine installed for some time now and it is doing a great job.
There are a couple of negatives however, firstly the orientation of the blast gates is important, in my experience the gate should be mounted vertically, opening upwards otherwise they fill with dust and wont close fully. Secondly all joints need to be sealed somehow, mastic, glue etc. otherwise loss of vacuum becomes a problem.

You may also be interested in the following products