Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
Package deal comprises the Axcaliber Dovetail Jig and the Axcaliber Through Dovetail Comb for Dovetail Jig
Axcaliber Dovetail Jig
Simple to set up and use, the Axcaliber Dovetail Jig is very robustly made from heavy gauge steel pressings. Fitted with cam action clamps, the workpieces are held quickly and securely while the smooth anodised finish on the 6mm thick machined finger template ensures that both parts of the joint are cut accurately and cleanly. Full instructions are supplied along with a quality 'Axcaliber' bearing guided dovetail cutter. The jig can be used with any router with a base diameter not exceeding 160mm that will take 1/4" shank cutters, (although lightweight models are most suitable). Fitted with the cutter supplied, the jig can be used to cut both lap and rebated lap dovetails for basic drawer construction or fitted with an optional bearing guided straight cutter, it will also produce 1/2" strong, precise comb or finger joints for tool boxes and utility furniture. Using the optional fine finger comb, the jig can be used to produce 1/4" half blind dovetails for spice drawers and jewellery boxes. A through dovetail comb is also available to further increase the range of joints possible with this versatile jig. Material capacity 275mm width 15 - 32mm thickness.
Axcaliber Through Dovetail Comb for Dovetail Jig
A through dovetail comb expands the range of joints that your Axcaliber dovetail jig can produce. Supplied with 1 x 12.7mm x 8° dovetail cutter (1/4" shank), 1 x 6.35mm twin flute cutter (1/4" shank) and two guide bushes. The standard 1/2" comb supplied with your jig is used to produce the tails of your joint using the supplied dovetail cutter and the 12mm guide bush; tail sockets are then machined using the through dovetail comb, the twin flute cutter and the10mm guide bush. Smaller 8° dovetail cutters may be purchased for producing a smaller pin size for thinner materials if required.