Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
A solidly made trade rated stapler, weighing in at 1.25kg and suitable for long periods of continuous use. It uses 20 gauge (0.9mm) wide crown (11.2mm) staples and in lengths from 6mm to 22mm. Primarily used for upholstery, it can be used for many other similar trades. Supplied with a swivelling exhaust air vent. The tool comes supplied with a 1/4" BSP bayonet; refer to the Airline Fittings section for details of suitable airlines and fittings. For quick release bayonet fitting use 100313 or 410251 (swivelling).
|Load Capacity||100 Staples|
|Operating Pressure||65 - 95psi|
14 December 2014
ExcellentCan't fault it. Just used it put 4mm ply down onto tongue and groove with 20mm staples. It joins the edges perfectly, when straddling the joints. Also used it on the plastic tile beading onto the tile backer board. It heald it tight for tiles to be put on.
2 January 2014
Great valueWhat a fantastic bit of kit.
27 September 2012
Accepts Arrow T50 staples Part 2Yes, the gun does not a safety stop on the nose but there is a safety latch behind the trigger to prevent accidental discharge, so as a responsible adult you just have to remember to engage the latch when not using the stapler.
30 December 2009
Decent staple gunGreat staple gun no time spent un jamming any more! Will quite happily run on 4 bar with no problems at all.
Mr A Powell
22 September 2009
Axminster 6-22 Air StaplerVery good value for money - initially went for a very cheap one from a competitor - but that jammed constantly- this one has performe faultlessly. Only downside is that it doesn't have a safety stop on the nose - so can fire off easily!