This heavy duty model uses narrow crown 18 gauge staples 5.8mm wide in lengths from 16mm to 38mm long. Very good for applications such as stapling hardboard panels, thin ply, T & G boards, fencing panels etc. Supplied with safety latch and swivelling exhaust air vent. The tool comes supplied with a 1/4" BSP bayonet; refer to the Airline Fittings section for details of suitable airlines and fittings.
|Load Capacity||100 staples|
|Operating Pressure||60 - 100psi|
1 May 2017
Powerful staplerBought this as I needed to fix 4 mm ply to battern and my other nailer was sinking them so deep ply wood come loose , the staple dept adjustment is perfect I tried with adjustments full in and fully out and the stapler works great ,had a tacwise before but this beats it by miles ,,comfortably to work with and not to heavy ,bought all the size nails and tested them all and can't fault this staple gun at all,very pleased
Mr Geoff Norfolk
12 February 2010
9040LGreat tool..... powerful, never jams..... at least not yet! Really pleased with it. Originally bought a stapler from a shop which cost nearly 4x this one...... it constantly jams and is a load of rubbish!!... wish I'd bought this one to start with.
Mitch, Burton on Trent
31 October 2009
9040L StaplerI've only tested this so far with 22mm staples but at 90 psi (max is 100 psi) this seems to perform as well as kit at 3 times the cost. Nicely fully sinks these staples with no effort though 12mm ply.