The Axminster coolant system consists of a 9 litre coolant tank, single phase electric pump, delivery pipe and a flexible discharge pipe equipped with a magnetic base which makes for easy mounting. A stop cock is provided at the entry to the discharge pipe. The unit may be positioned inside the lathe cabinet, under the bench, or in fact wherever you like as long as you can top it up and clean it out occasionally. An optional safety NVR switch is available separately. The tank is 360mm long, 240mm deep and 170mm high and the overall height including the motor is 310mm.
|Flow Rate||Approx 2 litres per min|
|Max Delivery Head||1,525mm|
|Tank Capacity||9 litres|
16 July 2015
Excellent Coolant System, and great value for moneyI have had this system a couple of months now and it has transformed my use of my TAIG mini mill.
Tom - Prosharp sharpening service
14 November 2014
Coolant pumpNot a bad little pump used on a grinder with lots of muck n filth going through it. Works ok and lifts suds 3 ft with ease. Not a bad flow but ensure you keep it cleaned out and toped up with fluid.
mike of Hampshire
24 October 2014
Very PoorThis product worked find for the first few week. Then worked intermittently and how no longer pumps at all. All pipes, pump and components cleaned thoroughly. Potential a good machine BUT FAILED TO WORK AFTER A SHORT PEREIOD OF TIME.