Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
This is a compact, high specification rotary table, 110mm diameter and suitable for use on the smaller milling machines. It is equipped with twin table locking clamps, No. 2 Morse taper central location, three tee slots and worm gear backlash adjustment. The 90:1 worm reduction gives a table rotation of 4 degrees per turn of the wheel and there are 120 subdivisions on the calibration ring to give a resolution 2 minutes of arc, sufficient for even the most accurate of work. Two slots machined in the base allow for fitting tee-slot locating keys for quick and accurate location on the milling machine table. Optional indexing plates and tailstock are available for more advanced operations. Height 75mm, centre height when mounted vertically 85mm.
5 September 2011
Rotary tableI bought this table to go with my Seig 3 mini mill and have now used it extensively in horizontal and vertical positions, it is very easy to clamp down to the table and being fairly large I find it useful that the handle lies hanging over the side of the table and out of the way.
23 February 2009
Rotary TableFor the price a really useful piece of kit. Accuracy not checked yet but for milling circular prfiles etc should be good. Does lack any positive stops for accurate arc forming but you can buy the dividing plates. It does have two table locks which work well, shame one is higher than the table so will have to be modified to stop workpieces or spacers catching on it as they rotate. One major mistake in the design is the boss of the handwheel sits lower than the base so it has to be positioned with the handwheel projecting over the edge of the milling table or put onto spacers. MIne has already been useful so I am pleased I bought it at this price.