Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
The M-360 is a very precise, small pillar drill best suited for small production batch work. It uses the ER16 collet system, which in turn uses collets with a closure of 1mm, so for example a 6mm collet will close down to 5mm. Collets have long been recognised as the most accurate tool holding system, so perfect concentricity is assured. The drill shank capacity is 0.5-6mm. The machine, although compact in size, is heavily built in cast iron. The column features a rack and pinion system to control the height of the headstock. The headstock itself has an exceptionally deep quill housing, ensuring accuracy even with the quill fully extended. There is a threaded depth stop, which can be locked to ensure a constant drilling depth. A 3-speed belt drive system is fitted, driven by a smooth running induction motor. The base has a work table surface machined into it with 14mm T-slots for work clamping. The drill is fitted with an interlocked chuck guard, LED work light and locking "E" stop switch. Please note, collets are not supplied; please choose from our selection.
|Base Size||385 x 200mm|
|Chuck Cap\Type||0.5 - 6mm ER16 Collet System|
|Diameter of Column||80mm|
|Max Chuck to Base||175mm|
|Overall L x W x H||385 x 200 x 975mm|
|Power||0.375kW 230V 1ph|
|Speed Range||3 speeds, 5,000, 6,700 and 8,300 rpm|
|Table Size||145 x 162mm|