Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
This machine has all the features required to take on the most demanding projects. Made almost entirely of cast iron with a dovetail column for huge strength and rigidity, the SX4 is fitted with a high torque 1,500W brushless DC motor with electronic variable speed. The spindle has an R8 taper and a speed range of 100-1,600rpm. There are digital displays for spindle speed, spindle height and head angle for ease of machine setting. The headstock is fitted with power elevation, meaning no more vigorous hand cranking. It can also tilt 45° right and 45° left. A neat touch is the digital headstock angle indicator, so no more messing around with a protractor here! A fine downfeed control for milling and a course feed for drilling are fitted. There are switch controls on the handles for thread tapping. All motor controls are grouped on the headstock for ease of use. The table is massively constructed, with a ground surface and a coolant trough with a drain outlet. An optional Z axis power feed which brings a higher standard of finish and a sturdy floor stand are available. This machine is a much better choice than the more usual round column designs, far more accurate and able to undertake complex projects. A full Digital Read Out version, 505108 is also available.
|Base Size||370 x 720mm|
|Diameter of Column||N/A|
|End Milling Capacity||40mm|
|Face Milling Capacity||55mm|
|Head Tilt||45°L 0° 45°R|
|Lateral Table Movement||245mm|
|Longitudinal Table Movement||410mm|
|Nose of Spindle to Table [Max]||400mm|
|Overall L x W x H||1,060 x 835 x 1,080mm|
|Table Size||240 x 820mm|
|Table Travel||450 x 245mm|
|T Slot Size||14mm|