This package deal comprises an Axminster Engineer Series SX4 Mill Drill, Axminster Engineer Series Powerfeed and Floor Stand
Axminster Engineer Series SX4 Mill Drill
This machine has all the features required to take on the most demanding of projects. The main parts are made from quality cast iron for strength and rigidity.
The SX4 has a high torque, quiet 1,500W brushless DC motor. For ease of use, a panel next to the motor houses all the motor controls. The electronic variable speed control gives a speed range between 100 to 1,600rpm. There are digital displays for the spindle speed and spindle height. The spindle has an R8 taper. The headstock runs in dovetail slides and features power elevation. The head tilts 45° right and 45° left. A digital angle indicator makes setting the headstock simple and accurate. The SX4 has a fine downfeed control for milling and a coarse feed for drilling. There are switch controls on the handles for thread tapping. The large table has a ground surface and a coolant trough with a drain outlet.
This machine is highly accurate. The SX4 mill drill will enable you to undertake complex projects.
Axminster Engineer Series Powerfeed
A very useful powerfeed system for the X-axis to provide a smooth, variable speed drive to the traverse of the table. This ensures much greater control of the cut finish, compared to feeding manually. The controls for left and right movement are simple, and movable stops provide auto stop in any position on the table. The switches have protection to IP67 allowing the use of a coolant system. The powerfeed is simple to fit to the mill and powered by a standard 230V plug, so requires no additional wiring.
Axminster SX4 Mill Drill Floor Stand
This robust fabricated steel floor stand makes a strong base for the Axminster SX4 mill drill. It has lugs around the base for bolting down to the workshop floor. The large cupboard offers plenty of safe storage space for tooling etc.