The UE-916A metal cutting bandsaw is robust and quite compact for the cutting capacities. It is suitable for use in fabrication workshops, engineering workshops and general factory use. The chassis and arm are stiff cast iron giving great strength and accuracy in the cut, whilst the welded steel base houses a coolant pump system and the electrical controls. The 1.1kW motor drives the blade through a choice of 4 speeds for a wide range of cutting tasks. The cutting bow has a hydraulic down feed control ram with a feed rate selection dial and lock off control mounted on the switch panel. A comprehensive guide system holds the blade securely so that accurate cuts are made every time. A blade tension indicator is part of the tensioning system for accurate tension setting. The vice has a clever setting latch plus the rear jaw can be swivelled for bevel cuts. Safety interlock switches prevent the machine being run whilst the blade access doors are open. Coolant is supplied to both sets of guides, the flow rates can be set using the lever valves. This is a well engineered machine that will do the job every day.
|Blade Speed||24, 40, 51 & 71 m/min|
|Max Cap Rectangular||225 x 345mm, 35 x 400mm|
|Max Cap Round||225mm|
|Max Cap @ 45º||165mm Round, 225 x 165mm Rectangular|
|Overall L x W x H||1,727 x 749 x 1,092mm|
|Power||1.1kW 415V 3ph|
|Bandsaw Blade Length||3,035mm (119.1/2")|