Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
The X2.7/SX2.7 mills are a modern, clean design which is very solid, easy to control and highly accurate. There are two models, both sharing the same rigid, dovetailed back column design with the headstock height control lever mounted in a natural position at the top. The table is of a generous size, with a fully ground surface and slides on adjustable wedged jib strips. The headstock has a digital read-out of the spindle extension for accurate blind hole drilling or tool setting. The downfeed has a fine feed system for milling, plus a direct feed for drilling. An interlocked swivelling guard is fitted. The main difference between the models is in the power unit. The X2.7 uses a variable speed brush type motor with reverse, which offers a decent amount of power for this size of machine. The SX2.7 version has a high torque brushless motor, controlled by a touch pad. This has much more torque especially at the lower spindle speed, is quieter and, because of the more advanced control system, offers the useful tapping function. The SX2.7 is a more advanced machine, with better control and versatility, but if you need a simpler machine the X2.7 would suit your purpose.
|End Milling Capacity||16mm|
|Face Milling Capacity||50mm|
|Lateral Table Movement||190mm|
|Longitudinal Table Movement||395mm|
|Nose of Spindle to Table [Max]||370mm|
|Overall L x W x H||725 x 620 x 880mm|
|Power||750W (230V 1ph)|
|Spindle Travel||Spindle 70mm, Headstock 290mm|
|Table Size||595 x 140mm|
|T Slot Size||12mm|