The package deal comprises Axminster Hobby Series AWEDE2 Extractor and the Axminster Flexible Extraction Hose Kit.
Axminster Hobby Series AWEDE2 Extractor
A chip and coarse dust extractor for extracting from saws, planers, spindle moulders, bandsaws and similar machines in a small workshop. Equipped with two cloth bags, the top one acting as the filter and the lower one for collecting the waste. Power comes from a 750W induction motor equipped with a no-volt-release switch and emergency stop button. If required, the cloth collection bag can be replaced with plastic waste sacks, which can be more convenient for storage of waste prior to disposal. An unusual feature of this extractor is the floor sweeping attachment which fits to the base of the machine, allowing the extractor to be wheeled around the workshop, collecting waste as it goes. There is a fine filter bag available for use when collecting medium sized dust particles, or alternatively, an optional fine dust cartridge filter can be fitted. (N.B.You must use plastic waste sacks with the fine filter bag or cartridge filter). The machine is supplied with approximately 600mm length of inlet hose; additional lengths of 100mm hose are available separately. This machine uses waste sack size - 560 x 915mm (340068).
Axminster Flexible Extraction Hose Kit
Lengths of high quality smooth bore flexible 100mm extraction hose complete with rubber cuffs at each end. 2 metres long, this is ideal for those with a single mobile extractor being used on various machines around the workshop. The rubber cuffs allow quick and easy connection as there is a degree of elasticity to accommodate extraction outlets around 100-110mm diameter. Supplied with 2 hose clips.