The MAX340M edgebanding machine applies edges to straight panels with an automatic feed. It finishes the edges of panels with either wood or plastic edges, the edging material supplied in coils up to 3mm thick and in strips up to 4mm thick. It is equipped with an automatic rear trimming cut-off guillotine with flush end trimming, radius scraping and buffing on both sides of the workpiece.
The Teflon-coated glue pot has a capacity of 1.2kg and includes five heating elements. A pair of pressure rollers applies the glue and improves the glue bonding. A heated in-feed fence improves adhesion on panels with a high moisture content in order to achieve a good finish. The working cycle is controlled by PLC (programmable logic controller), with separate controls for each unit and is fully adjustable for a fast, consistent working cycle. All of the machine's units are fully controlled using the LED control panel as well as the electronic glue temperature control with automatic temperature standby.
The flush trimmers have numerical indicators for adjustments, as well as copying discs, which allow for perfectly trimmed panels and combined with high quality cutters for 2mm radius cuts. There is also a scraper unit fitted to remove excess glue and fine tune the radiused edge. They also feature a high efficiency dust hood for a clean work area.
The buffing unit cleans and polishes edges and can be positioned wherever it is necessary. The complete protection hood allows for easy access to working units and includes an integrated, centralised dust collector with a diameter of 125mm.
This edgebander combines an excellent user experience with top quality banding, the perfect choice for smaller workshops looking to expand their quality panel work.
Please note due to the complex nature and set up requirements of these machines, they must be installed by AT & M engineers, please contact the Axminster Business Services Team, 0800 371822 or email@example.com for quotations on supply, delivery and installation. N.B. 16 Amp supply required. (5 pin, 3 x L, N + E )
|Banding Thickness||up to 4 mm|
|Banding Width||14 mm to 45 mm|
|Dust Extraction Outlet||125 mm|
|Feed Speed||5 m/min|
|Min Extraction Airflow Required||2,000 m³/hr|
|Min Length||120 mm x 120 mm|
|Nett Weight||440 kg|
|Number of Motors||4|
|Overall L x W x H||2,950 mm x 1,120 mm x 1,390 mm|
|Power||Total installed Power 3.8 kW 415V 3ph|