The ST-635 Dual Drum Sander has an impressive capacity of 635mm width by 150mm depth which can accommodate a wide range of items such as panels, boards and kitchen doors. It has a rubberised conveyor belt for feeding panels through without damaging the underside of the panel. With care, a remarkably thin panel can be sanded. The conveyor is provided with the unique Intellisand electronic variable speed control with load sensing which prevents overheating the abrasive. This gives an exact control of the speed of work feeding and thus the standard of finish. There are two machined aluminium drums onto which the abrasive is spirally wound and secured at the ends with clips and tensioning springs. The twin drums are fitted with digital read-outs which show the overall sanding height and, more importantly, the difference in height between the two drums. This allows easy re-setting of the rear drum when changing the abrasive to a different grit. There is also the exclusive Edge Sand feature which allows you to sand the edges of boards using the rear drum and a small fence and table system. Several clever setting guides are built into the machine to enable easy setting of the machine. The Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap. The drive to the drums is via a multi groove Poly-V belt ensuring vibrationless running and a long life. Fabricated from steel sheet and cast alloy, with removable panels for easy cleaning and maintenance. A large storage cupboard is provided in the floor stand for spare abrasive loadings. Twin 100mm dust extraction outlets allow clean working when connected to a suitable fine dust extractor. N.B. Requires a 16A supply outlet.
|Dust Extraction Outlet||100mm x 2|
|Overall L x W x H||1,500 x 850 x 1,480mm|
|Power||2.2kW 230V 1ph, 3.75kW 415V 3ph|
|Sanding Drum Diameter||127mm|
|Sanding Thickness Min\Max||1mm/150mm|
|Sanding Width Single Pass||635mm|
|Table Size||850 x 585mm|