Axminster Rip Fence Upgrade
Axminster Rip Fence Upgrade
£102.46 (£85.38 Ex. VAT)

Axminster Rip Fence Upgrade

Code: 100205

  • Upgrade for old and worn rip fences
  • Simple to fit, set up, and use
  • Ball bearing guiding for easy running
  • Rigid mounting rail and fence extrusion
  • Simple vertical clamping lever
  • Show More
£102.46 (£85.38 Ex. VAT)

In stock - get it Wednesday 1st Mar, order within and choose Premium delivery

Collect in store, we'll confirm your reservation within 1 hour.

Check stock at your local store

Chosen store -

Loading stock for

In stock - collect from in 1 hour

Low stock - collect from in 1 hour

Out of stock at

Change store
Learn how it works

We'll aim to dispatch your products the same day when you order before 4pm, Monday to Friday.

  • Standard UK (1-2 day) - free
  • Premium UK (next day) - from £6
  • International - available
Find out more

We're commited to selling high-quality products, however we also know thats there are times when you need to exchange or return an item.

  • No quibble 30 day returns policy
  • Arrange your return online, in-store or by phone
  • Simple and easy returns process
Find out more

Frequently Bought Together

  • Axminster Rip Fence Upgrade
  • UJK Technology Precision Mitre Gauge & Fence
  • UJK Technology Double Horizontal Featherboards
  • UJK Technology Dovetailed Mitre Slot Track
Total: £229.06

In Detail

This excellent rip fence upgrade is a godsend to anyone struggling with a worn or sub-standard bandsaw or table saw fence on an otherwise well performing machine. It is made from aluminium extrusions and features ball bearings for smooth running, adjustment for squareness, graduated scales and a quick action locking handle. The support rail fits to the front edge of the saw table with two brackets with holes positioned 23mm below the table surface. The brackets can be positioned along the length of the rail to suit different sized tables. If the table edge is not deep enough then simple angle brackets can be made to mount the rail. The length of the rail is 740mm and the fence is 550mm long by 65mm deep. The fence extrusion has tee slots on three faces for mounting false fences and other accessories. Altogether a very well-produced and effective accessory for upgrading your bandsaw or table saw.

Information Downloads

Reviews (20)

Customer Reviews

Overall rating 4.7 out of 5 based on 20 reviews

Newest Customer Reviews


Roddy Cameron

7 September 2016

Excellent replacement fence

I recently purchased a portable site table saw although I discovered that the original fence ( the saw arrived without it) was discontinued by the manufacturer. I was able to fit this fence to the saw and was even able to keep the extending table functioning with a little modification to the saw. The fence is actually far more accurate than the original would ever have been.
All round excellent product and very simple to fit

Jeff K

21 March 2016

Worthwhile improvement , now for the lowdown ...

Would definitely recommend but here are some tips on fitting . The 2 point fitting is easy enough , the brackets ( part number F15 ) have slots rather than holes at the top end allowing the fence rail ( F12 ) to be accurately aligned with the table . Getting everything sliding properly involves 4 things :- Firstly the fence ( F01 ) should seat flat along it's entire length on the table top . Secondly , that this applies along the entire length of travel of the fence rail ( F12 ) . Thirdly , both the bearings ( F07 ) are in contact and rotate as the fence travels along the rail & fourthly , that the fence is at right angles to the table top . If you find that the fence needs adjustment via the 90 degree screw & bearing eccentric shaft ( F08 ) this will mean checking and adjusting all of the above again . ( See previous revue on highlighting the hidden grub screw F05 , which fixes the bearing , you'll need 1/8th imperial allen key & some plus-gas ) . Further adjustment to get the fence parallel to the blade involves loosening the 2 bolts ( F02 ) , here you'll need a 6mm allen key & maybe plus-gas & mole grips . When the setup is complete you'll find that there is a huge amount of slop when the fence is not in the locked position , cure this by attaching "Slick" tape to the 2 surfaces opposite the bearings . ( Thanks to previous review highlighting this , I couldn't get teflon ) All in all it took about to 10 mins to fit & 2 hours to adjust correctly for my saw table . Some observations after fitting , I find If you apply sideways finger pressure to the end of the fence when locked there is some deflection & when you use the locking lever you need to push the fence down firmly on the table to avoid the fence rail flexing . Still a vast improvement , recommended & I believe good value ...


23 January 2016


Ive just installed the fence onto the original TS-250 table saw with the help of some cheap 40mm x 40mm x 5mm angle steal, the install was painless and i have to say this fence has made my finicky awkward table saw into a finely accurate machine, and i love it! If you need a table saw fence to replace the cheap nasty one that came with your saw you could do a lot worse than this one, worth every penny

cheers axminster , and well done on a great product, if you wanted to improve this product you could offer a version with a longer 1m front rail that would make it perfect in my eyes

John Gray

11 November 2015

Brilliant fence

I had been wondering about this fence for some time as the fence on my SIP bandsaw was awful. Every time I moved it it locked at a different angle. I'm not a fan of adjusting a rip fence to the track of a drifting blade, as I use the slots on my bandsaw to run sleds etc into the blade. Better to adjust the tracking properly and tune out the drift, and have it cut true. The fence can then be adjusted to be parallel to the slot and the cut. This fence once adjusted to be square to the table and true to the cut, can be moved to any position and when locked will still be square and true. This has raised the game of my bandsaw and turned it into a serious accurate cutting device. If you can't be bothered to track the blade properly, then this fence can be adjusted to accommodate the drift. You can then still make accurate cuts and joints etc, but reference your jigs etc from the fence rather than the slots on the table base. With hind site, I wish I had bought this fence a long time ago as it has transformed my bandsaw experience.

Steve B

10 October 2015

Better than the OEM

I bought this and fitted it yesterday. Fitting to the table (cast iron Record Power) was simple. I used the existing holes and my own nuts and bolts. I have yet to check its squareness and complete the set up. Good points - it moves smoothly , locks quickly and is very solid. Not so good points - the mechanism sits on the rail and can lift off when unlocked and when unlocked, you need to pull the slider towards you (away from the blade) in order to get the fence to move at a right angle to the table, otherwise, when you lock it, the fence moves a couple of degrees and does not end up where you expect it to. So saying, a vast improvement on the OEM version and the lever locking is excellent. At about £85 at the time of purchase, I think it's a bit pricey for what is effectively a couple of bits of aluminium extrusion, a casting and a couple of brackets. My advice, get a decent set up in the first place - the Axminster and Jet bandsaw tables and fences are just plain better by design.

Alternative Options

People Also Looked At