Sash clamps are especially useful for clamping large section workpieces. The bars of our trade sash clamps have a unique chemically blackened surface to resist corrosion. The 32 mm x 6 mm bars are made from cold drawn steel for strength. The grey ductile cast iron heads and slides are powder coated and with 50 mm x 27 mm wide clamp faces. The threaded spindles have hardened rolled threads with a twin start for rapid adjustment. The head has a flat base, allowing the clamp to stand upright without support.
|Clamping Force||5,884 N|
15 August 2017
Great for gluing upOver the years I’ve always wanted some decent clamps so when a friend asked me to build him a table I bought two 30 inch clamps to glue up the frame rails and legs. The clamps are heavy and solid and did the job with no flexing on the painted steel bars. A length of chain stops the lock pins from dropping and being lost on the workshop floor. I added some ply and cork packing to stop the heads marring the timber. Overall they were just right for the job, should last forever and will make future gluing up easier.