Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
A thoroughly modern design of dust extractor, for either mobile or static use with cartridge filters included as standard. The excellent performance comes from careful matching of the motor, impeller and housing, resulting in a quietly efficient machine able to extract chips and medium sized dust from all machinery found in a typical large trade workshop. Perfectly suitable for connection onto a 200mm ducting system, or use the twin 150mm connections for direct fitting onto a machine. An alloy impeller is fitted to reduce the risk of sparks and the extra large cartridge filters have a rating of 1 micron @ 100% capture rate. Large capacity plastic waste sacks and quick release straps are included. A comfortable tubular handle, steel rear wheels and two pairs of castor wheels are provided for easy mobility. The cartridge filters increase the potential use of this machine to include sanders as well as the normal range of saws, planers etc. The filters are easy to keep clean with the top mounted crank handles; the extra large filter surface area means that the general airflow is not reduced. Overall, a fine, modern extractor for any trade workshop. Hose not supplied. N.B. 16amp supply required.
|Air Flow||3,000m³/hr @ 200mm, 1,600m³/hr @ 150mm|
|Bag Capacity||170 litres x 2|
|Hose Diameter||1 x 200mm or 2 x 150mm|
|Noise Level||75dB @ 3M|
|Overall L x W x H||1,650 x 530 x 1,760mm|
|Particle Size||1 micron @ 100% capture rate|
|Power||2.2kW 230V 1ph|