This is a small, highly portable cyclone extractor, aimed at the smaller workshop with many different types of woodworking machinery in use. Having a high efficiency separation system means that the air passing to the filter is 99% clean of waste, maintaining a high airflow for top performance. The filter has a 1 micron @ 100% filtration performance and is fitted with a simple manual cleaning system. A manometer gauge gives an easy visual performance reference. The large waste bin is 105 litres and is easy to remove and empty. Fitted with sturdy castors, this extractor is quite mobile so is easy to move from machine to machine. However, with a 150mm inlet it also lends itself to be fitted to a permanent ducting system. Minimum inlet hose size 100mm. Able to run from a standard 13A plug, it is an attractive proposition for a small trade workshop or a keen amateur in a home workshop.
|Container Volume||105 litres|
|Filtration||1 micron @ 100%|
|Hose Diameter||150mm x 1, 100mm x 2|
|Inlet||150mm x 1, 100mm x 2|
|Noise Level||80 dB @ 3m|
|Overall L x W x H||1,300 x 1,100 x 1,560mm|
|Particle Size||1 micron|
|Power||0.75 kW (230V, 1ph)|
26 May 2016
It does what it says on the tin but the tin is to smallThis is by no means a trade machine I bought one of these extractors a month ago it is a good extractor with one very small but extreme limitation.THE WASTE drum size!!!! Today I planed 4 pieces of 6”x1” by 2 metres thats a grand total of eight metres of timber.The result both bags totally full.You then have to stop work empty the course drum and the fine bag which is now full of shavings as well clean the rest of the shavings with your hands from the cyclone replace the bags and try again.Time machining 15 mins=8metres of finished timber + twenty mins clearing blocked extractor
25 September 2015
A couple of issues, now resolved.I was missing on of the leg connecting brackets but was given a fourth (unnecessary) wheel.
15 November 2014
good - i recommand itI received the machine two weeks ago and i had to adjus the legs with an home made bracket due to a missing part. However the Axminster seller was helpful and i receive the missing parts yesterday.
8 April 2014
Cyclone extractor T2000CKApart from 3 missing parts that were left out by Axminsters suppliers two of which have been received. Had this machine existed it would have saved me buying 3 other type of vacuum devices. I am using it in a conjunction with a piped chip and dust system in my workshop, and very pleased in the way it sorts out the dust from the solids also the way it prevents the filter clogging up and degrading the suction as in my older units.