Axminster Trade Series AW10BSB2 Saw Bench
A robust machine, constructed largely from cast iron and heavy gauge steel. The 254mm blade gives a cutting depth of up to 75mm and is amply powered by a 2.2kW 1ph induction motor. Both the blade height and tilt controls are conveniently located and lock in position.
Axminster Trade Series AT107PT Planer Thicknesser
A well designed planer thicknesser especially suited to the trade workshop. Constructed from cast iron and heavy gauge welded steel, it will withstand heavy usage on a daily basis. The 3-knife cutter block has quick change HSS knives; these are self-setting, razor sharp and will give a superb finish.
Axminster Trade Series SBW3501B Bandsaw
The SBW3501B with its high specification is a very popular machine for the trade workshop. Cutting depth is controlled by a well engineered rack and pinion system, with a lock to set the guides into position. The powerful induction motor transmits its power via a multi-groove flat belt, ensuring smooth running and zero slip. Safety features include a motor brake, interlocked and micro-switched doors and an emergency stop switch.
Axminster Trade Series ATDP16B Bench Pillar Drill
This drill has a highly accurate quill and spindle assembly, running in NSK ball race bearings to ensure consistent drilling. Powered by a smooth running 650W induction motor, there are 12 belt speeds between 120-2,580rpm. The down-feed is via a one-piece cast iron handle with soft rubber grips and there is an accurate drilling depth control. A quality 3-16mm keyless chuck is fitted.
Axminster Trade Series BDS-612 Belt & Disc Sander
The belt sander can be used either horizontally or can be clamped at any angle up to vertical. The cast iron table can also be angled up to 45°. The disc has a quadrant guard for safety and an extra large cast iron table with a finely ground surface. This table also tilts to 45°.
Axminster Trade Series T-2000CK-200H 2hp Cyclone Extractor
This trade rated extractor is able to extract from larger, higher waste volume producing machines. The high efficiency airflow system ensures high, consistent performance. Over 99% of waste is separated from the air stream before the air is passed through the 1 micron filter. The waste container is easily detached from the machine. The machine is fitted with wheels for mobility.
|Cutterblock Diameter||70 mm|