Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
A total workstation - GCM 8 SJL Mitre Saw and GTA 2600 Adjustable Stand
The powerful GCM8SJL slide saw gives precise cutting, has a large capacity and is simple to set up making it suitable for a host of cutting tasks for the professional and home user alike. With a cut of 70 x 312mm at 90°, it has one of the largest cutting capacities of any 216mm 8" saw on the market. Bosch have ensured that every aspect, from set up to cut, is quick, simple and exact. It can be used to crosscut, mitre/bevel or make compound cuts, rebate and groove at a consistent depth. It can also crosscut with a -2° undercut facility. Mitre angles are easily set from front locking arm, use the embossed stainless steel scale with indents for quick setting of common angles (override for extra adjustment). Bevels are set by the accessible side lock lever with a quick turret stop for common 22.5°, 33.9° and 45° angles. Fitted with a laser, the cut line is always sharp and clear. The braked 1,600W soft start motor ensures a smooth consistent power whilst dust extraction is designed from two points, one of which travels with the sliding head to maximise waste collected via your extractor. The table has integrated side fences that pull out to aid work support. A top handle is fitted so that the machine can be carried easily. Supplied with 48T TCT blade for clean cutting.
The sturdy GTA2600 folding stand has adjustable work supports, left and right, which are both height adjustable and extendable for length for total work support. The legs have rubber end caps (one adjustable for uneven floors); legs are locked into position in use and can be folded easily for transport. It is supplied with 2 tool clamps and these, once fitted to your machine, clamp simply to the stand with a safety lock.
|Bevel Angle Range||47° - 0 - 2°|
|Dust Extraction Outlet||Yes x 2|
|Max Bevel Cut @ 45deg||Right 48 x 312mm, Left 70 x 214mm|
|Max Crosscut @ 0deg||70 x 312mm|
|Max Mitre Cut @45deg||45°- 45° = 48 x 214mm|
|Mitre Angle Range||52°-0-60°|
|Model||GCM 8 SJL|
30 November 2016
excellentFor less than £330 pound you get a whole lot of quality equiptment. Very well made, accurate, tons of features, light allthough quite large compared to the older model but worth the extra size. Seriously good value for money for diy and trade. Just cant beleive how much quality kit you get for the money. Hats off bosch and axminster good stuff.