This multi-use tool will saw, sand, cut, rasp, scrape, file and polish, just change the acessory and away you go. Few tools do so much, it's perfect for a whole range of tasks and trades. With many accessories that will solve many problems and get into the most awkward places with ease. Great for home renovation projects, in the workshop or on site for kitchen fitting, flooring, tiling, plumbing, car, boat, caravan repairs and many more. Using an oscillating movement at a high pre selectable speed allows for cutting and sanding in almost any material. With the correct accessory it will give a very accurate smooth finish. The working tool can be positioned in a 240° range on the machine and is clamped positively in place. The powerful 250W variable motor has constant electronics so there is never a power drop. The body of the machine is slim with a comfort grip for the best control.
Supplied complete with plunge cut wood and metal blade, segmented wood blade, Delta sanding pad and 5 x 80G abrasives, Fein accessory adaptor and L-Boxx inlay for stacking case (to fit Bosch 136 L-Boxx 151mm).
|Model||GOP 250 CE|
|Oscillation Rate||8,000 - 20,000/min|
|Pad Size Corner to Corner||94 x 94mm|
28 April 2015
bosch gop250cei have had two,,, both gearboxes failed
16 December 2014
Excellent en rénovationUtilisée pour la découpe de placoplatre (découpes précises et de formes particulières devant être propres), de bois, de PVC et de tubes de cuivre ainsi qu'en ponçage et grattage (avec la spatule rigide).
2 February 2014
Reliability is a real issue. Beware...I bought this as a replacement for my trusty old green Bosch multi after it had served me very well. I had it for 9 months before the gearbox completely failed. Like most trades people, I have one of these for occasional use to "get me out of a tight corner". Was disappointed when it failed. Also annoyed with myself as I didn't register for the 3 year warranty. Bosch kindly sent me a brand new machine of the same spec. I used this and just after the original 12 month period of the original machine the replacement started getting very hot indeed whilst in use. It has subsequently completely burned out!! Bearing in mind that this replacement is less than 6 months old, I am shocked! My company has purchased several Bosch blue machines, but the reliability is becoming questionable. Several faults with 10.8V drill driver, impact driver; chuck failure with 18V compact hammer drill, SDS drill intermittent switch failure, etc. I would recommend at best you register for the warranty as soon as purchased, or face very hefty replacement bills all too often.
3 November 2012
Great machineA replacement for the poor quality green 180 model. This a seriously good piece of kit. No vibration. low noise. can't fault it.
30 August 2012
Great in tight spacesI bought this last year, and have had it for about 9 months now.