EXCELLENT VALUE / VERY WELL MADE.
The picture does NOT show how good this coolant delivery system is.
The rear inlet is 1/4 BSP (approx. 1/2" dia)
The magnet 2 1/2" wide ,,,2 1/4" high,,,1 7/8". It sticks hard to metal surfaces. Like all mags, it doesn't like thick paint. There are two magnetic sides bottom and back.
The hoses from stem to nozzle are 12 inches long. The flexible part is 11 inches long. The nozzle hole sizes about 4mm (0.0157")
The little taps are BRASS!!! with proper little tension springs and they screw into a metal block. Nice and sturdy.
I had to change my milling machine (TOS FNK) and needed a new coolant system.
I came across this system and for £25 thought,,well its bound to be a bit mickey mouse but twin delivery keeps the slot cutters clear of swarf in both directions.
So I took a chance and was astonished when I unwrapped it.
Its a shame Axminster didn't advertise its qualities better. The product description and photo let it down badly.