The DeWALT DCN692P2 18V XR Li-ion 2-speed framing nailer features BRUSHLESS motor technology and XR 5.0Ah battery packs. This tool is comfortable to use, reasonably quiet with virtually no kickback. The compact, ergonomic design allows the nailer to fit easily into tight spaces such as between 400mm spaced studs. It has two power levels enabling it to fire all lengths of nails from 50 to 90mm. It has the capability to put a 90mm ring shank nail into soft wood. It takes nails between 2.8 and 3.3mm diameter. The sequential operating mode allows for precision placement and the bump mode for rapid nail fire. Being mechanical rather than gas operated means you get full performance at temperatures between -20° and +50° Celsius. The 30° - 34° magazine angle accepts most clipped head and off centre round head paper tape or wire weld collated framing nails. There is an easily adjusted depth control thumb wheel. Tool free stall/jam clearance minimises user downtime.
Supplied with 2 x 5.0Ah XR Li-Ion battery packs, multi-voltage XR charger, reversible belt hook, non-mar tip and heavy duty carrying case.
|Load Capacity||55 nails|
|Battery No.||2 x|
D. Bryant Garden Maintenance
22 February 2016
BrilliantWe chose this nailer as we work in any weathers and needed something for those frozen winter days. We use it predominantly for 50mm nails for feather edge boarding, may end up also getting the 2nd fix nailer for our fencing work as it'll be lighter for all day use.
18 January 2016
Needs manning upI had 1 for 3 days for firing in 63mm nails for roofing, has paslode no good in cold weather, but it broke after jus 6hours work, it woz great but not up to the job needs looking at