This kit comprises the DeWALT DCS520T2 XR plunge saw along with two 1.5m long guide rails and a guide rail joining bar. It gives you the potential to rip right down the middle of an 8 x 4 sheet with complete confidence and accuracy.
The DCS520 XR FLEXVOLT is one of the most powerful cordless plunge saws available, offering the same power as an equivalent mains tool. The DCS520 is extremely accurate; supplied with a 42-tooth blade, it gives you a clean finish with minimal breakout even in laminates. The parallel plunge action results in a smooth and constant cut as the saw enters the workpiece.
Variable speed allows you to select the correct speed for different types of materials, at the same time full wave electronics maintain a consistent speed under load. The 55mm depth of cut allows trimming and sizing of most common doors. The DCS520 plunge saw is quick and easy to adjust and features a bevel cut up to 47°. When used with a DeWALT guide rail, its anti-kickback design prevents the saw from moving backwards along the rail and helps stop the saw from climbing out of the workpiece when plunge cutting.
The DCS520T2 is easy to set up and accurately adjust to the guide rail. An ergonomic rubber grip gives you greater comfort and control. The DCS520 has an Airlock dust extraction port making it compatible with the range of DEWALT dust extractors. Coupling the saw to an extractor and using an enclosed guard can achieve around 90% dust extraction.
Supplied with 42-tooth precision saw blade, T-STAK case, 2 x XR FlexVolt 54V batteries, DCB118 charger and 2x 1.5m guide rail.
Please note: the XR FLEXVOLT battery is completely compatible with all existing DeWALT XR 18V products. It offers you an unprecedented 6.0Ah of power in any XR 18V cordless tool.
|Max Depth of Cut @ 45deg||44 mm|
|Max Depth of Cut @ 90deg||59 mm|
|Nett Weight||5.5 kg|
|Speed||1,750 - 5,000 rpm|
|Blade Diameter||165 mm|
|Bore Size||20 mm|
|Battery Capacity||6.0 Ah|
|Battery No.||2 x|
|Battery Voltage||54 V & 18 V|
|Corded or Cordless||Cordless|