This DWS520KT is supplied with 2 x 1.5m guide rails, connector and TSTAK kit box.
The parallel plunge gives a smooth and constant hand position while cutting whilst the 48 tooth blade gives a fine and accurate finish and allows you to maintain a constant smooth cut. The saw has full wave electronics even under a heavy load it maintains a constant speed. The variable speed allows you to select the correct speed for different types of materials. The enclosed guard gives a 90% dust extraction capability when connected to a vacuum extractor. The saw’s 55mm depth of cut allows the trimming and sizing of most common door sizes. The 1.5m guide rails included in the kit feature marks on the rail so you can see exactly the start and end of where the blade will plunge. The anti-kickback function stops the saw from moving backwards along the rail and helps stop the saw from climbing out of the workpiece when making plunge cuts. Rail adjustment allows you to adjust the saw accurately to the rail. TSTAK case for the saw is supplied.
|Dust Extraction Outlet||Yes|
|Max Depth of Cut @ 45deg||44mm (40mm with rail)|
|Max Depth of Cut @ 90deg||59mm (55mm with rail)|