Festool HK55 EBQ-Plus-FS Circular Saw & 1,400mm Guide Rail - PACKAGE DEAL

Festool HK55 EBQ-Plus-FS Circular Saw & 1,400mm Guide Rail - PACKAGE DEAL

* Required Fields

£301.96 (£251.63 Ex. VAT)

Click & Collect in store

Check stock at your local store

Click & Collect in store

Chosen store -

Loading stock for

In stock - collect from in 1 hour

Low stock - collect from in 1 hour

Out of stock at


Key Features

HK55 EBQ Plus Saw

  • High torque 1,200W motor, electronics maintain power under load
  • Maximum depth of cut of 55mm(2.1/8")
  • Easy-to-read, accurate depth setting with a simple lever
  • Pre-set depth for plunge cuts
  • Bevels cutting up to 50°
  • Blade guard features an integrated riving knife

Festool FS1400 Guide Rail

  • Guide rail converts Festool circular saw into a system for cutting sheet materials
  • Two embedded PTFE strips
  • Two underside neoprene strips to reduce slippage
  • Splinter strip cut by the saw blade on the first cut trimming exactly to cut line

In Detail

Package comprises the Festool HK55 EBQ Plus Circular Saw and 1,400mm Festool FS1400 Guide Rail.

HK55 EBQ Plus Saw
The HK55 is a high performance, high precision, versatile plunge saw. The high torque 1,200W motor features constant electronics which maintain the power under load. The HK55 has a maximum depth of cut of 55mm (2.1/8"). Setting the depth of cut is fast and accurate, using an easy-to-read scale coupled with a simple lever. You can pre-set the depth of cut for plunge cuts. The saw is capable of cutting bevels up to 50°. The swing control for the blade guard is on the front handle. In this position your hands are safely out of the way. Using the right blade for the job saves time and produces better results. Changing the blade on the HK55 is tool free and could not be easier. The blade guard features an integrated riving knife, increasing safety by helping to prevent the blade binding in the cut. Supplied with 18 tooth TCT blade, and T-LOC SYSTAINER case.

FS1400 Guide Rail
The combination of a Festool circular saw and the Festool Guide Rail creates a superb system for cutting sheet materials. The guide rail has two PTFE strips embedded into it allowing the tool to slide smoothly on the rail. On the underside of the rail there are two neoprene strips which hug the surface of the material, reducing slippage. There is also a special rubber strip on the underside which is used to minimise splintering on the top surface of the board. This strip is cut by the saw blade on the first cut and thereafter supports the upper face of the material whilst it is being cut. Length 1,400mm.



Dust Extraction Outlet Yes
Max Depth of Cut @ 45deg 42mm
Max Depth of Cut @ 90deg 55mm
Nett Weight 4.4kg
Power 1,200W
Rating Industrial
Speed 2,000 - 5,200rpm
Spindle Lock Tool free blade change
Blade Diameter 160mm
Reviews (0)

Reviews (0)

Own it? Review it! Be the first to tell everyone what you think about this product...

Frequently bought with

Alternative options

People also looked at