Precision is the key as with any Festool tool and, with an impressive 75mm depth of cut, this TS 75 plunge saw has the power and accuracy to deliver the most accurate cut. It is supplied with a 1,400mm guide rail that simply connects to the rail and has tool-less play setting. It is the larger brother of the TS 55 and its features include: exact depth setting with a notched depth stop (accurate to the millimetre), 0 - 47° angle cuts, side splinter guard, MMC electronics which adapt the speed to suit the material being cut, triple bearing of the motor for smooth running and long service life, sliding clutch for extra safety if the blade jams, quick brake, FastFix saw blade system, Plugit® mains cable and rotating dust connector. The saw can easily be connected to the Festool guide rail system for even greater versatility. Supplied with a 1,400mm guide rail, 36 tooth TCT blade, kickback stop, splinter guard in a T-LOC systainer case.
|Blade Diameter||210 mm|
|Bore Size||30 mm|
|Corded or Cordless||Corded|
|Max Depth of Cut @ 45deg||54.5 mm|
|Max Depth of Cut @ 90deg||75 mm|
|Nett Weight||6.2 kg|
|Speed||1,350 rpm - 3,550 rpm|
|Spindle Lock||Standard Feature|
3 April 2016
I couldn't do without this nowAs someone has already written in a review "Want one, get one, realise you always needed one", I couldn't agree more!!
13 March 2014
Want one, get one, realise you always needed one.This saw is the absolute business. I hire ours at work whenever we need it but I long to have my own just so it's all mine. 70mm Ali sections ripped down to a factory finish, easy. Glue up ready hardwood after one pass (with a sharp blade). No more finishing. Everyone I let use it immediately says " I've got to have one of these ". Usual response to anything Festool until you realise that's a nice holiday in the sun gone. A real nice one, with the rails and extractor factored in. And then you want the router. And the sander. Still worth it though. Note everyone gives high marks for value even at these prices.
22 November 2013
Excellent high quality build and a joy to useI am very much a Festool fan and now only buy that brand. I had an old consumer grade circular plunge saw and found it inaccurate and difficult to use freehand. I therefore bought the Festool and am delighted by the accuracy when used in conjunction with Festool rails ...I now always use the rail ..spend the time to adjust very accurately on panels and then have full trust that the saw will cut EXACTLY AND WITH NO SPLINTERS where I want.......no fiddling, no missed cuts, it is just like buying pre cut panels in a suppliers yard...but he uses a large wall mounted panel saw! This is a must have piece of kit in my workshop and the Festool build quality suggests it will be there a long time.
9 November 2011
SPOT ONCuts like a dream, the finish is superb cross cut and ripping. Bought a 2nd 1.4m rail + jointer & cramps for reducing doors and ripping ply etc, get them too, job done!
27 October 2011
MAGICWish we had bought one years ago