This 2Qt Pressure Pot Assembly Kit has everything you need to benefit from the increased capacity using your 4-stage Fuji Spray HVLP System. The 2Qt Pressure Pot Assembly offers several advantages. The 2.25L capacity is twice as much as a standard and three times that of a gravity fed gun. You can spray larger areas without refilling. There is now little weight for you to carry and manipulate so spraying is less tiring for your arm and wrist. Without an attached pot the spray gun will fit into smaller places and is able to spray at any angle, even upside down.
Please note, you will need both a standard 25ft hose plus a 2049F Whip Hose in order to us your Fuji Spray 2Qt Pressure Pot.
If using model 9600-G – GXPC Spray Gun, you will also need the 9060 L-Fitting (Order code 103702)
Supplied with 2Qt pressure pot plus adaptor, 1,800mm material fluid hose, quick-connect coupler, pressure tube and check valve and nipple caps
6 July 2017
Brilliant piece of kitI needed to spray eight very large wardrobe doors, I would have needed a ladder to spray them upright, but the remote pot allowed me to spray them flat on some trestles with the gun pointing down, this piece of kit also allows spraying of ceilings without the worry of paint getting into the pressure pipe, the reduction in weight in the hand is an added bonus, the dual pipes to the gun needed to go over my shoulder to accommodate my horizontal spraying, but this did not compromise the use of the remote pot, would highly recommend this as a worth addition to the Fuji system. For information I have an older type Q4 with an XT gun.