A 600mm long digital level, based around a heavy gauge alloy extrusion with a milled bottom surface and protective end caps. Featuring a multi-function digital read-out able to show Angle measurements, Percentage (or Relative) measurements and Tangent measurements. The large, easy-to-use function buttons are recessed to prevent accidental operation or damage. Also incorporating a switchable laser for long distance projection of angles or levels. With a digital accuracy of 0.10° this will give any carpenter or fitter an accurate, durable level for all setting out tasks. Supplied with protective bag.
|Batteries||3V Li-Ion & 2 x AAA|
|Laser Class||Class 2|
|Laser Diode||635 nm|
10 January 2012
Useful buy...well built - but...For the price you get good build quality and a useful tool for setting windows, cabinets, frames etc The audible indication is great for those ' difficult to see it' times. A couple of small design issues have arisen. The use of a rocker switch for the laser on an end cap means it is easy to knock on accidentally and the laser does not have an auto cut off - a slide switch would be an improvement. The auto shut off for the display also took ten minutes when left in calibration mode, not a major issue but might impact on battery life over a period of use. The display is large and readable and would benefit from a backlight facility. Finally the instructions have a touch of Stanley Unwin about them! " Hrizontal measurement..The protractor show the angle of surface off the horizontal plane...allow unit to settle for 6 seconds before nothing the angle"