This is the largest of the Jet open-ended drum sanders and has the capacity to sand boards up to 1,120mm wide (in two passes) by 100mm thick. The drum is balanced to reduce vibration to a minimum and has adjustments so that the drum and table can be set perfectly parallel to each other. The variable speed feed conveyor motor drives the timber through the sander at speeds from 3m/min down to virtual stop so that an excellent finish can be obtained even on the most difficult pieces of grained timber. The height adjustment handle works in 0.1mm increments for extremely accurate control over both finish and thickness. A major feature is the 'Sand Smart' technology, which gives an automatic reduction of the feed rate to avoid excessive material removal on uneven timber. Changing the abrasive loading is quick and easy using the self tensioning clip device incorporated into the roller, a clever tool being provided. A pair of in-feed/out-feed tables are available as an optional accessory for ease of handling longer lengths of timber.
The standard 22-44 model has three mounting options:
1. Bench mounting as supplied.
2. A closed cabinet stand with integral wheels (609005).
3. An open frame stand (609004).
A single 100mm dust extraction outlet is provided, efficient dust extraction is vital with these machines, please make sure your system is adequate.
Supplied with 80 grit loading, 100 grit conveyor belt, cleaning stick, one box of abrasive loadings and service tools.
|Dust Extraction Outlet||100 mm|
|Feed Speed||0 - 3 m/min|
|Nett Weight||90 kg|
|Overall L x W x H||1,050 mm x 680 mm x 1,300 mm|
|Power||Input 2.2 kW 230V 1ph|
|Sanding Drum Diameter||127 mm|
|Sanding Thickness Min\Max||0.8 mm to 100 mm|
|Sanding Width Double Pass||1,120 mm|
|Sanding Width Single Pass||560 mm|
|Abrasive Roll Width||76 mm|
Mr Niall Hammond
12 October 2009
Solid workhorseA solid, well built workhorse that can sand away for hours. Fitted on the bench in my case this machine gives excellent service and for the capacity of board takes very little space.
Mr JacK Dolan
31 July 2009
Jack DolanComing from a background of using belt/orbital sanders for finishing wide boards and table tops, this machine has revolutionised the way I work and saves me 6-8 hours per table.
Mr Tony Maund
7 March 2009
IndispensableThis machines saves you a lot of time hand sanding, planing or scraping. I am now able to use a lot scrap/cutoff's I would normally put into the fire.