Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
A floor standing morticer with a 25mm capacity. The unique screw and fast action nut allows the material clamp to be set across its length in seconds. With fully adjustable slideways the morticer has travel in both directions with lock on the fore and aft setting. The main operating handle has a clever ratchet setting which allows it to be quickly set in the correct position for optimum leverage. The depth stop is simple and very effective to use. Along the back of the main table is a mortice length setting device which allows the mortice length to be pre-set for reduced marking out. The cabinet base is fabricated from heavy gauge sheet steel and incorporates a shelf in the base for storage of chisels, bits and service tools. Bushes are provided for 3/4", 13/16" and 1.13/16" shank chisels. Supplied with cabinet base, chisel bushings and service tools.
|Capacity||140 x 190mm|
|Centre of Chisel to Back Fence||100mm|
|Max Chisel Size Hardwood||19mm|
|Max Chisel Size Softwood||25mm|
|Max Height of Timber||190mm|
|Overall L x W x H||700 x 580 x 950mm (1,550mm inc stand)|
18 March 2015
Fine for a small workshopNot a bad bit of kit. I use this in a small workshop to build doors and windows. I did try to to get away with their Axminster hobbie morticer but this was sent back after one week due to a massive amount to play on the table also having no travel.this machine does have plenty of travel on the table although it's a little bit annoying that the two handles for their lateral / sideways movement of the same and sometimes you use the wrong one and one,