Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
This ruggedly made extractor is designed for extended workshop use. Offering industrial quality construction and exceptional wood chip and sawdust extraction performance, it is large enough for a 300mm planer or many other workshop machines. Fitted with a high efficiency steel fan and the unique "Vortex" cone design which maintains a high collection performance by preventing premature clogging of the filter. This works by separating the waste from the airflow and diverting the waste into the collecting bag. The base is fitted with castors for easy mobility around the workshop. The 150mm inlet can be connected direct to a ducted system, but also supplied is a twin branch 100mm adaptor, allowing connection to either one or two machines. This machine has been upgraded to handle finer dusts with the addition of a 1 micron filter cartridge. Supplied with a pack of five collection bags and a 30 micron filter bag for use when collecting chips and course dusts. Supplied without a hose. Please note, this machine uses waste sack size - 785 x 940mm (410241).
|Air Flow||1,620 m³/hr @ 150mm|
|Bag Capacity||200 litres|
|Hose Diameter||150mm, 2 x 100mm|
|Overall L x W x H||940 x 510 x 1,830mm|
|Particle Size||30 micron|
|Power||1.1kW (Max Input 1.9kW) 230V 1ph|
3 December 2016
Delighted with this machineI've been agonising over which extractor to purchase for months. I finally plumped for this machine based on air flow and the filter cartridge. It's the business! On the downside, the flex is way too short and the three steel uprights that hold up the canister are pretty flimsy, making the machine feel a bit cheap. However, the motor is awesome and the filter cartridge is excellent. Surely the filter cartridges will lead to the extinction of the fine dust leaking bags? They should do, because that's the stuff the causes all the damage. Highly recommended.
22 October 2012
Done and dustedIt is hard to spend hard earned money on a dust extractor when there are so many more fun tools to buy. But this was an essential purchase for me with my old extractor not coping with all of the sanding power that I have installed. The extractor is quite big and heavy but it works like a dream. Cranked it up and the dust came out of the ducting in large amounts which the old extractor had left behind. Takes a couple of hours to assemble at the machine at the outside. The on/off switches are placed very low down near the fan. The good news is that these are NOT no current devices so you can switch the maching on and off at the socket. Overall very impressive with the extra dust cannister.