Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
A high quality chip/coarse dust extractor, for connection to multiple machines or, ideally, to a ducted system. With an airflow of 2,400 m3/hr it will easily handle 2-3 small workshop machines or 1 large multiple outlet machine. Robustly built, quiet running and efficient in design this machine will suit the majority of requirements found in a typical small carpenter/joinery workshop. Fitted with a high efficiency steel fan and the unique "Vortex" cone design which maintains a high collection performance by preventing premature clogging of the filter. This works by separating the waste from the airflow, diverting the waste into the collecting bags. You can also upgrade the filtration performance by the addition of two Fine Filter Cartidge's which will have a very noticeable effect when the extractor is used on sanding machines. The filter's performance is maintained by the use of the internal paddle blade, operated by a handle on the top of the filter housing. Powered by a 2.2 kW 415V 3ph motor, this is a compact and very versatile extractor. Supplied with a pack of five collection bags and a 30 micron filter bag. Supplied without a hose. N.B. this machine uses waste sack size - 785 x 940mm (410241).
|Air Flow||2,900m³/hr @ 200mm|
|Bag Capacity||400 litres|
|Hose Diameter||3 x 100mm or 1 x 200mm|
|Overall L x W x H||1,500 x 760 x 2,400mm|
|Particle Size||30 micron|
|Power||2.2kW, (Max Input 4.25kW), 415V, 3ph|