When Jet set out to create the Elite range of machinery, they produced a total package of engineering, precision, durability and safety that far exceeded market standards. The lathes comes with spindle run-outs so low as to be almost unmeasurable, plus hardening and grinding each gear in the headstock. Bed castings are made from certified Meehanite with bedways hardened to 70 HRC and coated with Turcite-B for outstanding wear and low friction characteristics. The E-1440VS lathe is the largest model, big enough for almost any workshop task and brings a standard of accuracy normally only found in much larger machines. The inverter drive system powers the spindle through a two speed gearbox, giving speeds on low of 30-365rpm and on high of 165-2,200rpm. A 150mm three jaw chuck is mounted in the D-14 spindle, the spindle itself having a 5MT taper and a 38mm bore. A very comprehensive list of standard equipment includes a 2 axis DRO, a 305mm faceplate, steady and follow rests with ball bearings, quick change tool post with four holders, coolant system, interlocked chuck guard and LED CNC style lighting. Perfectly suited to Education, engineering workshops, prototype manufacture and so on, with accuracy and durability at top class levels.
Please note, due to the complex nature and set up requirements of these machines, we strongly advise that they are installed by AT & M engineers, please contact the Axminster Business Services Team, 0800 371822 or email@example.com for quotations on supply, delivery and installation.
|Cross Slide Travel||170mm|
|Distance Between Centres||1016mm|
|Height Over Cross Slide||219mm|
|Max Diameter over Bed||355mm|
|Overall L x W x H||1,955 x 762 x 1,475mm|
|Power||2.2kW 415V 3ph|
|Spindle Speed||Variable, 30-2,200rpm|
|Thread Pitch Range||4-112 tpi Imperial, 0.45-7.5mm Metric|
|Top Slide Travel||100mm|