The next generation takes the best of the old and adapts it to move forward. Jet Elite represents the most precise, most durable and safest metalworking machinery. Each machine draws a new line, signalling a new standard of excellence. The ETM-949 mills are both variable speed and have either mechanical or inverter drive electronic variable speed (EVS). Both have spindle brakes fitted. The headstocks pivot front to back and side to side as well as sliding across the bed to give the most versatile milling possible. ABEC 7 spindle bearings are fitted to give an impressively low spindle runout. The main castings are certified Meehanite to give uniform soundness with consistent physical and mechanical properties for dependable performance in use. Hand scraped slideways retain more lubricant for a longer life. For ease of use a 3-axis digital readout is fitted, together with X and Y axis power feeds. These, along with a coolant system, give a consistent finish to the work and prolong tooling life. The Elite mills will meet your expectations, using the best of the old and bringing in the highest standards expected today.
Please note, due to the complex nature and set up requirements of these machines, we strongly advise that they are installed by AT & M engineers, please contact the Axminster Business Services Team, 0800 371822 or firstname.lastname@example.org for quotations on supply, delivery and installation.
|Head Tilt||45° - 0° - 45° Vertically & Horizontally|
|Lateral Table Movement||890mm|
|Longitudinal Table Movement||304mm|
|Nose of Spindle to Table [Max]||460mm|
|Overall L x W x H||1,730 x 1,600 x 2,133mm|
|Power||2.2kW 230V 1ph Input|
|Spindle Speed||ETM-949 60-4,500, ETM-949EVS 60-5,000 rpm|
|Table Size||225 x 1,245mm|
|T Slot Size||16mm|