This large Jet cyclone extractor is highly efficient due to its directly mounted cartridge filter and the two stage airflow system separating the waste before the filter. This gives a higher airflow than single stage machines of comparable power. Even though it is quite compact it still has a large waste drum, easily emptied due to its independent castors. The deep pleated cartridge filter will capture particles down to 1 micron and is fitted with a manual dual paddle cleaning system. The alloy bodied induction motor runs cool and the noise level is quite moderate, so not too intrusive in the workshop. You have a choice of two inlet sizes, so either one larger 200mm or triple 100mm to suit a wide range of machines. This 3hp model also has the benefit of remote control of the switching and a timer function giving a choice of 2,4,6 and 8 hour run times. Well made, quiet and powerful, this extractor is a great choice for the larger workshop. N.B. 415V 3ph 16A including neutral, supply required.
|Container Volume||290 litre|
|Filtration||2 micron @ 99%|
|Inlet||1 x 200 mm or 3 x 100 mm|
|Nett Weight||110 kg|
|Noise Level||76 dB|
|Overall L x W x H||775 mm x 1,448 mm x 2,235 mm|
|Airflow||2,540 m³/hr @ 200 mm|