The JWBS-9 bandsaw has some impressive cutting capacities for a bench top machine, up to 230mm wide and 80mm deep. Overall this is a robust machine with a 300 x 300mm table that can be tilted up to 45°. Powered by a quiet Input 350W induction motor, it is fitted with an automatic 12V work light for a better view of work in progress. The wheels are balanced and have a long-life PU coating, to prolong blade life. The saw is supplied with a precision mitre fence with an aluminum profile for better work support and a range of cutting angles from 60° left to 60° right. The bandsaw takes 1,510mm (59.1/2") long blades 3mm/10mm in width. Supplied with rip fence, mitre fence, work light and 6mm blade.
|Blade Width Min\Max||3mm (1/8") to 10mm (3/8")|
|Dust Extraction Outlet||50mm|
|Max Depth of Cut||80mm|
|Max Width of Cut||230mm|
|Max Width of Cut with Fence||95mm|
|Overall L x W x H||520 x 420 x 730mm|
|Power||350W 230V 1ph|
|Table Size||300 x 300mm|
|Table Tilt||0° - 45°|
|Min Extraction Airflow Required||200m³/hr|
|Bandsaw Blade Length||1,510mm (59.1/2")|
19 May 2017
Ok for small piecesIt's not bad I'm terms of value and cuts small pieces well, such a pen blanks, knife blanks, anything 1" or less, however trying to cut 2" plus pieces us a real nightmare.
5 July 2016
Very good value for the moneyI've had one of these saws for about 3 years now. It does all it says it will do. It isn't a large machine it's a hobby machine, it's perfect for tracing small shapes.i agree that it won't cut 2" timber but then that's not what it was built for. Cuts 1" timber no problem , just let it work at its own pace.
11 May 2016
ExcellentI am very pleased with my choice, took me about an hour to set it up, I have made trial cuts and I am more than happy with the results. When I set the table to 45 degrees it was bang on, without any adjustment!!. I have read the other comments and believe there is no point in expecting to win a motor cycle race with a bicycle.
1 April 2016
Good sturdy machineUnboxed set up and running in under an hour.With a few minor adjustments to the guides and a tweak here and there to the pressed steel guards,tension the blade and off you go.Fitting the cast aluminium work table was easy and needed very little adjustment to get it square.Over all I'm very pleased.
31 March 2015
Great valueI have never had a bandsaw before and am on a tight budget so this one seemed ideal. Out the box it is a neat and tidy piece of kit and is straightforward to set up. I looked at a review on Youtube and some guy showed that this saw couldn't cut in a straight line. Neither could mine at first. Follow the instructions in the handbook and with a few adjustments the saw cuts absolutely straight. It doesn't seem to lack in power either. Don't ask it to do things that it wasn't designed to do and it should be fine.