This Jet lathe is an excellent introduction to woodturning. It is a sturdy, smooth running machine and has the power and precision to turn any number of projects, ranging from pens, bottle stoppers, drawers, cupboard knobs, platters, boxes and bowls. Powered by a 375W induction motor, with 6 belt speeds there is a good range for any project. Speed changing is easy with convenient doors that give full access to the belt and pulleys; a grab handle raises the motor re-tensions the belt. The bed is precision ground cast iron, with much wider than average bedways. This gives great support to the tool rest and tailstock, both fitted with cam locking. The spindle has the common M33 x 3.5mm thread and has a 2MT internal taper. There are also 24 integrated indexing positions making it easy to cut fluting and veining. The tailstock also has a 2MT internal bore, it has 50mm of travel and is self-ejecting. The Jet JWL-1015 is the perfect choice for the novice woodturner or the advanced turner looking for a small, fully featured machine for the workshop.
Supplied with 80mm faceplate, 2MT drive and tailstock centres and knock-out bar.
N.B. The distance between centres will vary and be dependent on the type of centres or accessories used.
|Distance Between Centres||368 mm|
|Max Diameter over Bed||254 mm|
|Nett Weight||33 kg|
|Overall L x W x H||890 mm x 300 mm x 370 mm|
|Speed||(6) 400 - 3,300 rpm|
|Spindle Thread||T38 M33 x 3.5 mm|
|Tool Rest Stem Diameter||16 mm|
|Tailstock Taper||2 MT|
|Headstock Taper||2 MT|