The JWS-34 kX is really a combination of two machines, spindle moulder and router-moulder. It accepts 30mm bore tooling and in addition there are two collets, 8mm and 1/2", supplied with the machine so that, when used on its highest speed, it can utilise router cutters with a diameter of 35mm or greater (smaller cutters simply would not have a high enough peripheral speed). The machine has one fully adjustable fence, micro adjustment on the outfeed fence and a 100mm dust extraction outlet at the rear. Height adjustment of the spindle is made with a generous handle on the front of the machine and tooling changes can be speeded up with the aid of the spindle lock. For curved work the moulder is supplied with a ring fence with its own integral 100mm dust outlet. On the bed of the table is a T slotted groove in which the mitre guide slides. The mounting holes for the power feed are tapped into the base, thereby removing the need to drill holes in the table. A 20A supply is recommended.
For long lengths of material and for added safety we thoroughly recommend the addition of the power feed unit (340195). This is easily attached using the very clever quick fit base (800430) that clamps onto the corner of the table casting.
|Dust Extraction Outlet||100 mm|
|Max Spindle Projection Above Table||120 mm|
|Max Tooling Diameter Above Table||180 mm|
|Max Tooling Diameter Below Table||160 mm|
|Min Extraction Airflow Required||1,000 m³/hr|
|Nett Weight||145 kg|
|Overall L x W x H||950 mm x 750 mm x 1,170 mm|
|Power||Input 2,6 kW 230V 1ph|
|Spindle Diameter||30 mm|
|Spindle Speed||1,700, 3,500, 6,000 & 8,000 rpm|
|Spindle Travel||80 mm|
|Table Height||830 mm|
|Table Size||540 mm x 635 mm|
5 October 2016
SO HAPPYWell guys & gals, I've been pondering a spindle moulder for some time and I've just made do with my router table (which is very loud and not completely sturdy!!), as we have been getting more and more busy I've finally taken the plunge and punched this JET! it arrived today and without disappointment the delivery guy was friendly and went out of his way to help me with it into the workshop. Unpackaged the Jet and it SCREAMS quality!!! so happy.. The machine is quite small but this was one of the reasons i went for the jet as we have not got a lot of space. Every part of this machine looks and feels study and strong. Very simple to put together-well only the fence really and the collets, the instructions are like Ikea so personally just went off the picture... not a problem.
12 October 2010
Jet Spindle MoulderDelivered by a friendly driver who did his best to get it as near to my door as possible- thank you. This is a new machine to me (first time I have ever used one) but I love it, it is powerful, accurate, sturdy and produces a superb finish. A good dust extraction system is a must !. The instructions however, are very poor for assembling this machine and there doesn't appear to be any operating instructions, but maybe most buyers of this machine would have already used one.