The KJD12 230V switch is commonly used on small woodworking machines. Rated at 16 amp, it will be suitable for induction motors up to 1.5hp. Simply connect using insulated spade terminals, the connections being clearly marked for input and output. It is a no-volt-release type of switch, providing safety in the event of an interruption of power. Requires a rectangular hole approximately 40 x 60mm, the switch being secured by 2 mounting bolts (not supplied). Fitted with a dust cover and having positive action push buttons plus a large, red self locking Emergency Stop hinging cover.
1 June 2017
Especialy pleased with the service providedUsed this switch to replace a KJD3-5/240 switch on a bench Drill made by Nutool for B&Q. It only required me to fit bigger spade connectors to the wiring. My thanks to Customer Services who responded promptly and provided me with a vey clear wiring diagram for the switch. It may be worth providing the wiring diagram to other customers as a download from the web page? Overall I am delighted.
14 November 2014
KJD12 NVR SwitchBought as a replacement for the switch on my Axminster bench grinder which had started to trip out. Fast delivery, two minute job to replace it, there are just four spade connectors. All in all excellent.
S Moffat, Midlothian
29 October 2014
KJD12 SwitchI have a Clarke Cement Mixer and I broke the switch. On searching on line for a replacement found the Axminster site. Ordered late afternoon on Tuesday arrived mid morning Wednesday. Switch fitted and works perfectly. Very good service and product exactly what was required. Thank you.