Variocut is the ideal solution for cutting expansion gaps. To allow for the expansion and contraction of the wood, a gap must be provided between the wall and roof panelling or flooring. For aesthetic reasons, this gap must be even and relatively small. The saw blade can be set to the minimal cutting width of 4mm via the rotary knob, thus enabling clean and efficient cutting of this groove.
Expansion gaps on roofs or in flooring
Expansion gaps between wall panels, cladding and floor
Various longitudinal and transverse cuts
Can be used for wood repairs with Minispot cutter
|Max Depth of Cut @ 45deg||N/A|
|Max Depth of Cut @ 90deg||20mm|