A blend of high quality oils, resins and dryers. A most dramatic demonstration of the qualities of this finish was given by Jan Sanders who, having turned a small oak bowl, applied three coats of finishing oil, allowed it to dry and then poured a quantity of blue water based wood dye into the bowl. After gently swilling it around, Jan poured the dye out and wiped the bowl dry. Needless to say no trace of the dye could be detected on the inside of the bowl. This oil will give good resistance against water, alcohol and food acid marks and will give a matt to satin finish dependent upon the number of coats. A gloss can be achieved by applying a paste wax. Also approved safe for toys. Coverage: 1litre to 8 - 12m². Drying: approximately 5 hours.
|Application Method||Brush \ Rag or Cloth|
|Clean Up||White Spirit|
|Coverage||8 m² to 12 m² per litre|
|Drying Time||5 hours|
22 October 2010
Works excellently with a couple of tricksI've been using this for a while now and really like the finish I can get.
Mr Kevin Gatward
31 January 2008
Easy to Apply Good Looking FinishThis oil produces a good finish enhances the wood and is relatively easy to apply. My one criticism is with the 5litre can. It is very difficult to decant the oil into a smaller container without spilling the contents especially when the can is full. An improved pourer like they have on engine oil cans would improve matters.
17 November 2006
Very nice natural-look finishI tried this oil first on bows, the need was of an elastic finish that would provide good weather protection.