Makita 10.8V 2-piece Combi Drill and Impact Kit with 2.0Ah batteries; comprises a HP331D 2-speed combi drill and TD110D impact driver. Supplied in a type 1 MAKPAC case with two slide-on 2.0Ah Li-Ion batteries and a DC10WC charger.
The HP331D Combi Drill has a powerful motor producing higher speeds and maximum tightening torque. It has a 2-speed mechanical gearbox coupled with a variable speed trigger to give a good range of speeds for drilling or driving screws. The masonry drilling capability makes this a good all-rounder.
The TD110D Impact Driver can produce a very high torque of 110Nm. It features a powerful motor, 1/4" hex fitting and M5-M12 bolt capacity.
Both tools have a variable speed trigger, electronic brake and built-in work light. They have an in-built battery protection circuit, designed to protect the battery from damages due to over discharge, high temperature or overload current. Other features include an ergonomic soft grip and belt clip.
The 10.8V slide-on Li-Ion batteries provide a substantial weight saving. They also provide high energy capacity and accept more repeat charges giving a real "long-life" service battery and tool protection.
|Battery Capacity||2.0 Ah|
|Battery Voltage||10.8 V|
|Corded or Cordless||Cordless|
|Torque||Combi: 30 Nm - Impact: 110 Nm|
|Torque Settings||18 + drilling|
7 February 2016
Top drill top staffBought this after seeing it advertised earlier this week. Needed to replace a pair of 18v makitas. Drove to Nuneaton to test drive the impact driver as I was unsure of the power. Can't speak highly enough about the staff at Nuneaton. The manager set up a drill to drive in some 5 1/2 screws. Hard wood. No probs! Good size and weight. Don't think it would be suitable for day in day out work but seems great value to me.