This is a 3kg hammer from Makita which has 2.9 joules of impact power, enough to drill 28mm in concrete and drive a 80mm TCT core though masonry. Weighing a manageable 3.4kg this powerful 800W drill has an even lower vibration rating in hammer mode of just 11.5m/s² and 15m/s² in rotary use, with torque limiters which disengage the motor drive should the drill snag when the operator is holding the torque sensitive side-grip handle. Supplied with an integral light and reverse switch. All main grip handles have the vibration reduction rubberised grip and a well proven 2-mass isolated handle assembly where the main grip handle is mounted on vibration absorbing springs and fulcrums. Complete with an SDS+ chuck and an additional quick change 0 - 13mm drill chuck. Supplied with 15 drill bits, chisel and case.
|Hammer Only||Standard Feature|
|Impact Energy||2.9 joules|
|Impact Rate||0 - 4,500 bpm|
|Max Cap Concrete||28mm|
|Max Cap Steel||13mm|
|Max Cap Wood||32mm|
|Max Core Bit||80mm|
|Rotation Only||Standard Feature|
|Speed||0 - 1,100 rpm|
23 July 2012
Best there isI've bought two of these drills, bought one new while I was getting the other repaired. For the money you will not find a better tool. Perfectly weighted for both drilling and chiseling.