• Jig with unique features to cut worktop widths up to 700mm • Unique locator for positioning guide bush • Unique cutting line finder • Joining facility at 22.5 and 45 degrees • Circular pockets can be cut with 50, 70, 80 mm diameters • Preset connector pockets with 200mm spacing • 45 degree corner guide edge, long sweep radius guide edge (approx 460mm) • 100mm radius guide edge, single uninterrupted guide edge 880mm long • Numerous slots to enable sub-surface clamping • Variable positioning system to set length of butt socket joint for 45 degree joining
Contents Include: • 1 x Worktop Jig • 1 x Protective Holdall • 4 x Dowel Pins • 4 x Fixing Clamps • 2 x Cutline finder • 1 x Measuring locator • 1 x Guide bush • 3 x Offset dowel pin • 1 x Instruction manual
Axminster Extra Kitchen Worktop Jig
Incorporating several unique features with precise positioning and sighting of the cut line, this is a postform jig intended for the professional user will cut worktop up to 700mm wide with a jointing facility at 22.5° and 45°. The main template body is 16mm thick synthetic resin laminate plate, machined to very fine tolerances to guide your router fitted with a standard 30mm guide bush. The guide slots and preset angles are located with 10mm metal dowel pins to ensure exact positioning against the edge of your worktops and encompass the principal angles required, plus positioning for the new style connectors and various inserts. Flush face clamping provides a totally unimpeded working face whilst enabling the template to be held securely to the worktop using any combination of the eight sliding locations for the recessed clamp heads. Cutting errors are often handed down from an inaccurately located guide bush. To eliminate this we provide a locator for the standard 30mm guide bush to ensure its precise concentricity when mounting and securing it to the router. To ensure error-free cutting of the location so that it accepts the end of the mating worktop we have incorporated a width measuring locator facility in this jig. Set between static dowel pins and a sliding pin, the width of the top can be gauged without measuring or guesswork, providing the exact amount cut in to accommodate the worktop end. The jig also has 3 circular holes to cut pockets at 50, 70, 80 mm diameter, 3 Preset connector pockets with 200mm spacing, a 45° corner guide edge, Long sweep radius guide edge (approx 460 mm radius), 100mm radius guide edge and a single uninterrupted guide edge 880mm long. Numerous slots to enable sub-surface clamping (using Axminster clamp and head combination), variable positioning to set length of butt socket joint for 45° joining, positioning for setting length of butt socket joint for 22.5° joining and also positioning (using dowel pins) to set jig long edges to 22.5°, 30° and 45°. All machining is specified utilising a 30mm guide bush and a 1/2" router cutter.
Axminster Extra Kitchen Worktop Jig
Model
AWTJ1
Postform Jig
"Over the years of kitchen fitting, I have used my own homemade postforming jig and have purchaced two ready made ones. I was looking at this AWTJ1 extra jig to see if it was worth the cost. Well I can say yes it is well worth it, the features on it are very good. The flush clamps are just wonderfull, no more holding clamps to get in the way of the router, the pins fit nice and snug and the cut line finders are excelent and very easy to line up the cutter. All in all for me this is a very good tool. If any fault could be found I would say that it could be made longer for the 900 wide worktops but as its not all that often I will be cutting these, I will have to stick to my older standard 1000 jig."
- Mr Peter ward
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
