Router Table Insert

A simple heavy-duty plastic moulded router table insert measuring 230 x 305 x 9.5mm thick with two inner removable rings (2.5/8" and 3.7/8" dia.) and a steel lead-in pin. A number of concentric rings marked on the underside of the plate simplify the job of locating the router prior to drilling the mounting holes. The table insert may be recessed into virtually any type of top and either fixed down with screws in each corner or just left loose. The latter option is probably best as it is then easier to make adjustments using levelling screws positioned in the rebate to ensure that the insert fits exactly flush to the surface of the table. The table insert is slightly crowned which ensures there is no sag with the router in position and that the table is always at its highest point as the cutter reaches the work for maximum accuracy. The inner insert ring has a register which accepts the range of 1.3/8" screwed guide bushes featured elsewhere in this section; these bushes can be used in conjunction with a template for copy and repetition work. Comes complete with securing screws, optional corner clamps, inserts and lead-in pin.
Also available is a template for routing out the recess for the 810175 insert plate. This is used in conjunction with a 1/2" diameter cutter and two guide bushes of 40mm and 20mm diameters.