Small moulding planes designed to cut fixed radius curves on an edge Supplied in pairs CT1 cuts 1/16" and 1/8" radius CT2 cuts 3/16" and 1/4" radius Easy to use - cuts on either push or pull stroke Kit supplied with extrusion with all 4 radii and 600g silicon carbide abrasive
Veritas Cornering Tools
Although at first sight they may not look it, these are actually small moulding planes designed to cut a fixed radius curve on an edge. Supplied in pairs, each tool is ground with a different radius on each end - one cutting 1/16" and 1/8" radius and the other 3/16" and 1/4". Easy to use, the plane will cut on either the push or pull stroke, remove material quickly and cleanly and will not cut more than their predetermined radius. Included in the kit is an extrusion with all 4 radii on it and a piece of 600g silicon carbide abrasive so the tools can be honed correctly and are always ready for use.
Practice makes perfect
"You need to take care with these tools. A little practice goes a long way and know your specific timber before you begin. There is a tendency to tear out if you're not careful. If you would like to leave the router switched off for once though these are your guys!"
- Anonymous
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar