Jet JWBS-18 MK2 Bandsaw

The Jet JWBS-18 MK2 is intended for heavy work and has cast iron blade wheels, a super cast iron table which can tilt from -10° to +45°, a locking rip fence which is supported at the front and rear of the table and extends slightly beyond the cast iron table to give an excellent capacity both sides of the blade. On the face of the rip fence is a point cutting attachment which is ideal for re-sawing. The mitre fence is 'T' slotted into the table for accuracy, safety and extended capacity. The blade is guided both above and below the table with micrometer-adjusted thrust and bearing rollers which give a positive support to the blade, resulting in a very good quality of cut and extended blade life.
With fully interlocked doors and electro-mechanically braked motor and with the blade tension and tracking controls, all easily accessible, this machine is for the professional workshop where an accurate bandsaw with good capacities can become a very popular machine with which to work. To move this machine around the workshop we recommend the purchase of the mobile base unit (Stock Number 708119). This additional base unit is easy to fit and allows the machine to be moved without fear of tipping the unit over or causing any damage to either the operator or the machine.
N.B. A 20A supply is recommended when used with 240 volt supply.