Trend Varijig Tenon and Grooving Jig

Allows grooves and tenons to be cut using a router as well as crosscutting boards with a router or circular saw. The frame is adjustable to allow narrower or wider grooves to be routed. The maximum adjustment is 70mm depending on the diameter of the router base. The edge of the frame can be used as a guide to trim a panel square using a router. Two sliding stops to set groove length. Squaring butt has the facility to accept a waste block to allow a full-length groove. Fixing screws are included for this purpose. Working length is 400mm. Use with a router with a guide bush and with a minimum 8mm projection fitted. 2 clamps are required to clamp the jig to the work piece.