Axminster TiN Coated Tapered Plug Cutters

The first 3mm of the plug is to the stated size, the rest gradually increases in diameter at about 3°. The result is a plug that will sit perfectly in a counterbored hole with just a light tap home. If using the same timber and the grain is orientated correctly, after trimming the plug should be practically invisible. These plug cutters are Titanium Nitride coated for wear resistance and longevity. When cutting pugs from a piece of timber we recommend using in a drill press or power drill in a suitable drill stand, then simply 'pop' them out of the board with a screwdriver.